Embrace the power of water and discover a cleaner and sustainable way with the Nebia Dual-Temperature Bidet Attachment. Featuring front and rear wash, adjustable water pressure and temperature, and a simple installation for a life-changing bathroom experience.
- Adjustable water pressure from gentle to strong with a custom Nebia spray
- Adjustable water temperature from cool to warm
- Precision nozzle adjuster for front to rear wash
- Self-cleaning nozzle
- Easy DIY install – takes about 15 minutes and fits most standard toilets
- Corrosion-resistant aluminum control knobs
- Made from 65% recycled plastic – a first in the industry!
Product Requirements & Compatibility :
- The Nebia Dual-Temperature Bidet Attachment must hook up to the hot water supply at the sink in your bathroom. If your sink is farther than 2 m / 6.6 ft from your toilet, we recommend our Ambient Bidet Attachment instead.
- Our attachment fits nearly all standard Round and Elongated toilet bowls. Click here for the install videos and review the product specifications below for fitting the bidet attachment to your fixture.
The Nebia Bidet Attachment will fit nearly all standard Round and Elongated toilet bowls, including most one-piece and curved toilet fixtures (commonly referred to as French Curve). Refer to the fit diagram below for exact specifications for fitting the bidet attachment to your fixture.
Bolt holes must be between 5-1/4 inches and 8 inches apart. You will also need at least 3/4 inch clearance from the center of the bolt holes to the back of the toilet tank.
Fixtures with Curved Tanks (French Curve Fixtures)
- Measure 2-1/4 inches in a straight line from the center of either bolt hole to the edge of the toilet fixture (shown as A in the diagram above).
- Measure from Point A (established in the step above) towards the toilet tank. You will need at least 3/4" of clearance (shown as B in the diagram above) in order for the Nebia Bidet Attachment to fit on your toilet.
Dimensions and weight:
- Product Weight 432gr (15.24oz)
- Product Thickness 8.5mm (0.34in)
- Product Dimensions (L x W x H): 39.2 cm x 25.7cm x 7.3cm (15.4in x 10.1in x 2.9in)
- Cold Water Hose Length 60cm (23.6in)
- Hot Water Hose Length 200cm (78.7in)
Nozzles and Spray:
- Supply Water Pressure Range 14.5 psi - 116 psi
- Supply Water Temp Range 32F - 158F
- Flow Rate 0.26 gpm at 26psi
- Angle Adjustment Range 21º in total
- Material 65% recycled ABS
- Knobs Aluminum
- Cold Water Hose Material Stainless Steel
- Hot Water Hose Material Polyurethane
- T-valve material Brass
- Hot Water adapter Brass