Uninstalling the Nebia Hook Set

To remove your Nebia Hooks, follow the directions below based on the installation method you chose:

Screw Method

1. Unscrew set screw at the base of the hook using the Allen key and remove the hook
2. Unscrew 2 screws using Philips screwdriver
3. Remove baseplate from wall
4. (If not wooden wall) pry out wall anchors
5. Patch-up the wall as best you can 

Adhesive method

1. Unscrew set screw at the base of the hook using the Allen key and remove the hook
2. Pry out the backplate from the wall with slow and even pressure
3. Remove remaining adhesive tape from the wall using a straight edge; Goo Gone and use of heat from a hairdryer may help ease removal of adhesive

To remove your Multi-Purpose Hooks, follow the directions below:

1. Insert a thin flat tool (i.e. flat blade screw driver, putty knife) in-between the wall and the rear flange of the hook. Using two tools may ease the removal.
2. Slowly pry the hook from the wall until it comes off.
3. Clean off any adhesive residue from the wall or hook using soap and water. For harder to remove adhesive, use rubbing alcohol OR Goo Gone Adhesive Remover.
4. If you've removed a drywall plate from the wall along with the hook, you can patch up the holes in your wall with spackling paste and touch-up paint. If you need to purchase additional drywall plates, please contact us at support@nebia.com.