To ensure the strongest adhesion, do not get water or moisture near the adhesive for a minimum of 24 hours. Ideally, wait 72 hours before placing anything on the shelf or dock.
Adhesive installation tips:
- Clean and Dry Wall - Cleaning the shower wall with mild soap and water or rubbing alcohol, ensures the adhesive has an ideal surface to bond to. Next, make sure the shower wall is completely dry before installing the shelf or dock.
- Press and hold the shelf or dock firmly against the wall for 60 to 90 seconds - This will ensure the adhesive is stuck well to the wall forming a strong bond.
- Let the adhesive dry for 24 hours (minimum) - The adhesive needs time to properly cure/dry before getting wet or supporting the weight of the wand/soap and shampoo bottles. At room temperature, the adhesive bond strength will reach approximately 50% after 20 minutes, 90% after 24 hours, and 100% after 72 hours.