In rare cases, you may notice a slight side to side rocking motion after installing your Nebia Spa Shower when raising or lowering the head and arm. This may happen in shower setups where the tile wall is not completely flat due to uneven or heavily textured tile.
To solve this, we have designed two gray stabilizers, located inside the Toolkit, under the Wand Cleaning Cap. The stabilizers will act as a shim between the main bracket and your shower wall.
- To install the stabilizers, first, remove the main shower bracket from the wall. Then attach the two stabilizers on the back of the bracket. In the guide below, you will see two green lines indicating the recommended areas to place the stabilizers.
- Then, reinstall the bracket from Step 05 onwards. Your Nebia Spa Shower should now have a rock-solid feel once reinstalled.