- After waiting 20 minutes, insert the hose into the bottom of the Bracket. You will hear a click.
- Place the Wand on the Dock, with the metallic side of the Wand facing you.
Congratulations, you are all set! Continue to the next step to learn how to make the most out of your Nebia Spa Shower 2.0.
Having troubles with this step?
I cannot get the Hose to click into place.
First, check to make sure the slot at the bottom of the Bracket is free from obstructions. Once you’ve done this, try applying a little more force, and you’ll hear the Hose click into place.
I only want to use the Nebia Head, and I will not be installing the wand.
For the Nebia Spa Shower 2.0 to operate properly, the wand must be installed at all times. We've designed the head and wand to work together, allowing you to customize your experience. If you do not want to use the wand, simply leave it resting on the dock.
I am unhappy with where the Dock is placed. How can I fix this?
If you need to move the dock, we have a few recommendations that will help (Full uninstall video). First, start by applying a small amount of rubbing alcohol or GooGone at the base of the dock (this will help break down the adhesive bond) and wait for about 10 to 20. Next, you will need to use a putty knife, spatula (even an ice scraper will work) to remove the dock from your wall. After removing the dock, you will need to order replacement dock adhesive by Clicking Here. Once you are ready to re-install the dock adhesive follow the steps Outlined Here.
I can not install the Hose because there's an obstacle in the way.
Please be sure you have reviewed the compatibility requirements needed to install the Nebia Spa Shower 2.0. Remember, you will need a full 25 inches of clearance below the water outlet to install. If your shower setup has an obstacle in the "Area must be clear" zone, you may need to modify your existing setup. Please feel free to send us a photo, and we would be happy to recommend a solution.