Before installing Nebia by Moen remove the wand plug:  

Your shower may come with a plug installed at the base of the bracket (pictured below). If you have a wand be sure to remove the plug before installing your Nebia by Moen.

If you have already installed the shower onto the wall follow these steps below:

1. To remove the plug, first, make sure the unit is disconnected from the wall.
2. To disconnect it, push the button on the top of the wall bracket, and then lift up and outward on the wall bracket to unhook it from the bottom bracket retainer (step 1 & 2, see below).
3. Then, on the back of the wall bracket, near the bottom, there should be two black buttons. Push the button for the port containing the wand plug.
4. While the button is depressed, pull out the plug. Finally, re-mount the wall bracket by sliding the base of the bracket onto the bottom bracket retainer, pressing it back into the collar, and finally click in the Wand. These steps are shown on page 3 of the document Nebia by Moen Handhower set-up guide.

​​

Install guide links:

• Nebia by Moen Handhower set-up
• Nebia by Moen Rainshower 
• Nebia by Moen Combo

To install Nebia by Moen you will need the following:

• Water heater temperature of at least 115°F/46°C
• Water pressure of at least 20psi/1.4bar

SPACING

• The water outlet must be in a wall (not the ceiling).
• The recommended floor to water outlet distance is 72"-84"(183-213cm). 
• The minimum clearance from water outlet to ceiling is 4" (10cm). (A)
• Make sure there is a minimum of 25" (64cm) of clear space between your shower arm and the top of the trim/temperature controls. (B)
• The minimum clearance from the nearest sidewall is 5" (13cm). (C)

OTHER

• Your wall must have a 1⁄2" NPT (or 1⁄2" BSPT) pipe connection (this is standard in most bathrooms).
• For slate surfaces you will have to use the included screws instead of the adhesive pads to secure the bracket.  
• Trim/temperature controls are not included.
• Nebia by Moen can be installed if you have a ledge (shower/tub combo). 

Still unsure? Send bathroom photos to support@nebia.com and we'll let you know.

Nebia by Moen delivers a blissful spa shower experience which you’ll enjoy for years to come — and it won’t take long to install.

Unlike a traditional overhead-handheld combo shower system, which often costs thousands of dollars including extra valves, in-wall plumbing and an expert to help, you can install Nebia by Moen yourself. Simple and intuitive “click together” features assure watertight seals without complicated plumbing tools. If you can change a lightbulb, you can install Nebia by Moen.

Install guide links:

• Nebia by Moen Handhower set-up
• Nebia by Moen Rainshower 
• Nebia by Moen Combo
• Nebia by Moen Waist High EU set-up

Through our partnership with Moen we're able to help with:

• installation issues
• missing components
• warranty claims or product defects 
• ordering replacement parts

For more information about installing Nebia by Moen, please visit moen.com/nebia or contact Moen directly by calling (800) 289-6636 in the U.S. or (800) 465-6130 in CANADA. You can also email Moen's support by following this link, click here, then select Send an Email, and complete the contact form. 

The best gets better!

We are happy to announce our second Kickstarter campaign was a major success with over 4,600 Kickstarter Backers bringing our project to life! On March 13th our project was fully funded and we immediately began working on the next phase, the manufacturing, and production of thousands of Nebia 2.0s in order to start shipping to our Backers. If you have not already seen our Kickstarter campaign Click Here to get all caught up!

So what's new with Nebia 2.0, what are the big updates:

• More Heat, a Hotter Shower: Nebia 2.0 is 29% warmer than Nebia 1.0.
• Better Coverage: Nebia 2.0 has twice the water coverage compared to conventional showers. 
• More Power, More Efficient, More Effective: - Nebia’s droplets come in contact with your skin 3X faster than standard showerheads, meaning greater pressure and rinsability. 
• More Colors, More Style: By popular demand Nebia 2.0 will be offered in Matte Black and Matte Silver.  
• Works in More Homes Than Ever: Less pressure? No problem! Thanks to the revamped pressure regulator, Nebia 2.0 now works in homes with well-below-average water pressure (as little as 20 psi) while still providing a great shower experience.
• Less Humidity: Nebia 2.0 maintains the same luxurious in-home shower experience as Nebia 1.0 while creating less humidity in your bathroom.

If you missed our campaign don't worry, you can still order your very own Nebia Spa Shower 2.0 by Clicking Here.

The Nebia Spa Shower 2.0 has been manufactured to the highest standards of experience, design, and water efficiency. The Nebia 2.0 features brand new proprietary nozzles (our H₂Micro™technology), engineered using custom fluid dynamics models, perfectly positioned to maximize the water that comes into contact with your skin leaving it more hydrated and refreshed.

The shower feels warmer (+29%) than Nebia 1.0, droplets fall faster (3X) while providing more coverage for your body (2X), making the experience remarkably exhilarating, all the while saving 65% of the water used by regular showers.

Want to know how much you'll save with Nebia 2.0? Click Here to calculate your potential savings with our Online Calculator based on your shower routine.

The Nebia Spa Shower 2.0 features brand new proprietary nozzles, engineered using custom fluid dynamics models, perfectly positioned to maximize the water that comes into contact with your hair and skin leaving you feeling more hydrated and refreshed.

Through rigorous testing, we have optimized our nozzle technology to rinse away shampoo and conditioner from all hair types, lengths, and densities. The water droplets fall 3X faster while providing 2X more coverage for your body than a traditional shower, making the experience remarkably exhilarating. 

Be sure to stop by Nebia inc. instagram for more product photos and videos by Clicking Here.

 Make every drop count.